How to Clean Jewellery with Baking Soda

How To Clean Jewellery With Baking Soda

Share This Post

Cleaning jewellery is only one of the many uses for baking soda, a multipurpose home item. It may remove filth and grime without harming surfaces that are sensitive because it is a gentle abrasive. Additionally acting as a natural disinfectant, baking soda can assist in eliminating any bacteria or other pathogens that might be hiding on your jewellery.

Baking soda can be used to wash jewellery in a number different ways. You can either soak your jewellery in a baking soda solution or make a paste out of baking soda and water. Additionally, baking soda can be used to clean particular kinds of jewellery, such gold or silver jewellery.

  1. Before You Begin

It’s vital to remember that not all jewellery may be cleaned with baking soda. For instance, cleaning jewellery including pearls, opals, or turquoise with baking soda may harm the precious stones. Additionally, exercise caution when cleaning jewellery with coated areas as baking soda has the potential to destroy the plating.

It is important to speak with a qualified jeweller if you are concerned whether cleaning your jewellery with baking soda is safe.

  1. Jewellery Cleaning with Baking Soda Paste

Use baking soda paste to clean jewellery as follows:

  • To make a paste, combine one part water and three parts baking soda.
  • Using a soft cloth or toothbrush, apply the paste on your jewellery.
  • Gently massage the paste into the jewellery, being very careful to get into any greasy or filthy areas.
  • Use warm water to give the jewellery a thorough rinse.
  • Use a gentle cloth to pat dry the jewellery.
  • Jewellery Soaked in Baking Soda Solution
Jewellery Cleaning with Baking Soda Paste
  1. Take the following actions to immerse jewellery in a baking soda solution:
  1. In a bowl, combine one part baking soda with ten parts water.
  2. Soak your jewellery for 15 to 30 minutes by placing it in the solution.
  3. Take the jewellery out of the mixture and give it a good rinse in warm water.
  4. Use a gentle cloth to pat dry the jewellery.
  1. Baking soda is ideal for cleaning certain kinds of jewellery
  1. Sterling Jewels

Use baking soda to clean silver jewellery by doing the following steps:

  • Use aluminium foil to line a bowl.
  • Fill the basin with your silver accessories.
  • Cover the jewellery with a solution of baking soda.
  • Add some baking soda to the jewellery’s surface.
  • Pour boiling water from a kettle over the baking soda mixture.
  • Give the jewellery two to three minutes to settle in the mixture.
  • Take the jewellery out of the mixture and give it a good rinsing in warm water. Use a gentle cloth to pat dry the jewellery.

2. Gold Accessories

Use baking soda to clean gold jewellery by doing the following steps:

  • Combine one part liquid dish soap and one part baking soda.
  • Create a paste by adding adequate water. Using a soft cloth or toothbrush, apply the paste on your gold jewellery.
  • Gently rub the paste into the jewellery, being very careful to get into any greasy or filthy areas.
  • Use warm water to give the jewellery a thorough rinse.
  • Use a gentle cloth to pat dry the jewellery.
  1. Different Kinds of Jewellery

You can also use baking soda to clean other kinds of jewellery, like pearls, gemstones, and diamonds. To be sure it doesn’t damage the jewellery, it’s crucial to test the baking soda solution on a discrete section of it first.

  1. Tips for Using Baking Soda to Clean Jewellery
  • When cleaning jewellery, always use warm water because hot water might harm some jewels.
  • When cleaning your jewellery, especially fragile pieces, use gentleness.
  • Refrain from using sponges or brushes with abrasives since they may damage the jewellery.
  • After washing, make sure the jewellery is completely dry to avoid tarnish.
  • Apply baking soda to your jewellery to clean it.
  1. Baking soda can be used to clean jewellery in two major ways:

Baking soda can be used to clean jewellery in following two major ways:

  • Powdered baking soda

 Combine one part baking soda and two parts water to produce a paste. Using a soft cloth or toothbrush, apply the paste on your jewellery. Scrub the jewellery gently to get rid of corrosion and debris. After giving the jewellery a good thorough wash with water, gently pat it dry with a cloth.

  • Baking soda solution

Combine one part baking soda and ten parts water to create a baking soda solution. Soak your jewellery for up to fifteen minutes by placing it in the solution. To get rid of tarnish and filth, gently scrub the jewellery with a soft cloth or toothbrush. After giving the jewellery a good thorough rinse with water, gently pat it dry with a cloth.

  1. Cleaning particular kinds of jewellery

 The following are some further suggestions for using baking soda to clean particular kinds of jewellery:

  • Silver jewellery

Use a delicate cloth to apply a paste made of baking soda to clean silver jewellery. Scrub the jewellery gently to get rid of tarnish. After giving the jewellery a good thorough rinse with water, gently pat it dry with a cloth. Jewellery made of silver can be easily cleaned with baking soda. To clean silver jewellery, you can also  make a paste by mixing equal parts baking soda and water. Apply the paste with a gentle cloth or toothbrush to the silver jewellery. Gently massage the paste onto the jewellery, being mindful of any tarnished places in particular.

  • Gold jewellery

 Use a solution of one part baking soda to ten parts water to clean gold jewellery. Soak your jewellery for up to fifteen minutes by placing it in the solution. Using a soft cloth, gently scrub the jewellery to get rid of any dirt or grime. After giving the jewellery a good thorough rinse with water, gently pat it dry with a cloth. Gold jewellery can also be cleaned with baking soda. Make a paste by combining equal parts baking soda and water to clean gold jewellery. Using a gentle cloth or toothbrush, apply the paste onto the gold jewellery. Gently scrub the paste over the jewellery, being cautious to get under any grime or debris. After giving the jewellery a thorough water rinse, pat it dry with a soft cloth.

  • Pearls

When using baking soda to clean pearls, exercise caution because they are more delicate than other jewellery.  To make a solution, combine one part baking soda with three parts water. For fifteen minutes, immerse the pearl jewellery in the solution. After taking the jewellery out of the solution, give it a good water rinse. Using a gentle cloth, pat dry the jewellery.

  • Diamond jewellery

 Use a solution of one part baking soda to ten parts water to clean diamond jewellery. Soak your jewellery for up to fifteen minutes by placing it in the solution. Using a soft cloth, gently scrub the jewellery to get rid of any dirt or grime. After giving the jewellery a good thorough rinse with water, gently pat it dry with a cloth. Jewellery containing diamonds can also be cleaned with baking soda. Make a paste by combining equal parts baking soda and water to clean diamond jewellery. Apply the paste with a toothbrush or gentle cloth to the diamond jewellery. Gently massage the paste onto the jewellery, being mindful of the setting in particular. After giving the jewellery a thorough water rinse, pat it dry with a soft cloth.

  1. Keep jewellery safe when not in use

It’s crucial to preserve your jewellery carefully when not in use to keep it from tarnishing. The following advice can help you store jewellery:

  • Keep jewellery in a dry, cold environment. Jewellery should not be kept in damp areas like the bathroom as this can lead to tarnish.
  • Keep jewellery in a jewellery box or a purse made of soft material. This will lessen the likelihood of tarnish and scratches on your jewellery.
  • Keep jewellery in its own place. Jewellery of different kinds shouldn’t be kept together since this could lead to scratches.
  1.  Some suggestions for using baking soda to clean jewellery

Here are some suggestions for using baking soda to clean jewelry:

  • Pay close attention to the spaces between the stones when cleaning jewellery with several stones, such as a necklace or ring. To get rid of any dirt or debris, use a toothpick or a soft toothbrush. • Be careful to use extreme caution when cleaning jewellery that has delicate stones, like opals or pearls. Avoid rubbing the stones too firmly since this may lead to damage.
  • Wash the plating of any jewellery with delicate settings, like a filigree pendant or cluster ring, thoroughly using a small, gentle brush.
  • Make sure to give your jewellery a thorough rinse after using baking soda to clean it.
  1. Advice on How to Clean Jewels
  • Regularly clean your jewellery. This will lessen the accumulation of tarnish, dirt, and grime.
  • Keep your jewellery somewhere dry and cool. By doing this, the jewellery will be shielded from tarnish.
  • Refrain from wearing jewellery in the pool or shower. The jewellery might be harmed by pollutants like chlorine.
  • Take your jewellery to a qualified jeweller for cleaning and repairs if it has significant tarnish or damage.

  1.  Some more methods of cleaning jewelry

Here are some more methods pf cleaning jewelry:

  • Microwave approach

 This is a quick and simple procedure, but keep in mind that not all jewellery can be cleaned in the microwave. To clean jewellery in the microwave, just combine two tablespoons of baking soda and one cup of water in a basin that is safe to use in the microwave.  After submerging the jewellery in the mixture, microwave it for one minute on high. After taking the bowl out of the microwave, let it to cool fully. After giving the jewellery a thorough water rinse, pat it dry with a soft cloth.

  • The aluminium foil technique

 This technique works well for polishing badly tarnished jewellery. Using the aluminium foil method, line a basin with aluminium foil and add enough boiling water to cover the jewellery to clean it with baking soda. To the water, add one tablespoon each of baking soda and salt, and stir until the ingredients are dissolved. After submerging the jewellery in the mixture, let it soak for ten to fifteen minutes. After taking the jewellery out of the solution, give it a good water rinse.

  • Toothbrush method

 This is useful for cleaning portions of jewellery that are hard to reach or have complicated settings. Simply make a paste by mixing one part baking soda to three parts water to clean jewellery with baking soda the toothbrush way. Using a soft toothbrush, apply the paste to the jewellery and gently scrape. After giving the jewellery a thorough water rinse, pat it dry with a soft cloth.

  1.  Baking soda for specialised jewellery cleaning
  • Engagement rings

 Precious stones like sapphires or diamonds are frequently used to make engagement rings. Make a solution by combining one part baking soda and three parts water to clean an engagement ring. For fifteen minutes, soak the ring in the mixture. After taking the ring out of the solution, give it a good water rinse. To dry the ring, use a gentle cloth.

  • Watches

 Cleaning watches can be challenging, particularly if their seals are water-resistant. Make a solution by combining one part baking soda and three parts water to clean a watch. Wipe the watch with a soft toothbrush dipped in the solution. Make careful not to get the solution within the watch’s mechanism. After giving the watch a thorough water wash pat it dry with a soft cloth.

  • Costume jewellery

Low-cost materials like plastic or metal alloys are frequently used to create costume jewellery. Mix one part baking soda to three parts water to make a solution that can be used to clean costume jewellery. For fifteen minutes, soak the jewellery in the mixture. After taking the jewellery out of the solution, give it a good water rinse. Using a gentle cloth, pat dry the jewellery.

  •  Safe Practises for Using Baking Soda to Clean Jewellery
  • Before washing the entire piece of jewellery, make sure to test the baking soda solution on a discrete part of the piece. This will lessen the chance that the jewellery may be harmed by the baking soda solution.
  • Jewellery containing soft stones, like opals or pearls, should not be cleaned with baking soda. The stones could get scratched by the baking soda.
  • Use caution when polishing jewellery with complex settings. Avoid over scrubbing the settings as this may lead to damage.
  • After cleaning, give the jewellery a thorough water rinse to get rid of any remaining baking soda residue.
  • Use a gentle cloth to pat dry the jewellery to avoid the formation of water stains.
  1.  Conclusion

Jewellery is among the many surfaces that baking soda can be used to clean. It is also a reasonably priced and multipurpose cleaning solution. It may remove tarnish, filth, and grime softly and without harming your jewellery because it is a mild abrasive. You may maintain the best possible appearance for your jewellery by cleaning it with baking soda as suggested above.

More To Explore

jewelry

Where Can I Buy The Open Heart Necklace?

Heart necklaces symbolize unbreakable companionship, allowing friends to carry a piece of each other wherever they go. Furthermore, they are for everyone, regardless of age.