How to Clean Your Engagement & Wedding Ring

An engagement ring or your ring or wedding band as it is commonly referred to is not only one of the most beautiful products associated with love but also a piece of jewelry that requires some special care. No matter how careful, is it to clean your engagement ring every day, there will come a time when it will become dirty and untidy, and worn through normal use such as dirt, oil, and general usage.  

Their maintenance makes them glowing as well as being in good condition as all know that a clean piece always looks good. Fortunately, this is one of the easiest things that you can do and you don’t need to buy costly solutions or special equipment. Below, you will find simple and efficient tips on how to clean an engagement ring Tips and tricks to Diamond tennis bracelets. 

Soap and Warm Water 

Among the simplest and perhaps the most widespread techniques to clean your rings is using what is commonly used on dishes; soap and warm water. This is a gentle method that is suitable for most revolving rings especially those with stones and or diamonds, gems, and plain metal bands. 

How to do it: 

• Take warm water in a bowl and mix a one and half teaspoon of mild liquid soap in it. 
• Put your rings in the solution and leave it to marinate for approximately 15-20 minutes. 
• First, it is recommended to use a soft toothbrush to clean and massage the ring around it being cautious, especially with the surface which might have some small holes where some dirt might have accumulated. 
• Submerge the ring under warm running water and ensure that all the soap is washed off the ring. 
• Wipe the ring gently with a sponge or towel or leave the ring to dry. 

Baking Soda Paste 

For a ring that requires little extra care, using a paste that has baking soda can help in cleaning the stubborn stain to give back the sparkle to the ring. Baking soda is gentle enough to be an abrasive, thus useful in cleaning without scratching your jewelry. 

How to do it: 

• Take some amount of baking soda and dissolve it in water to get a thick consistent paste. 
• Take the paste and using a soft toothbrush brush the outer part of your ring. 
• Concentrate on those areas which are dirty or have lost their sheen. 
• Wash the ring under warm water so that all the paste can be washed away. 

Vinegar and Baking Soda Solution

For a closer cleaning and particularly for rings with diamonds or other semi-hard gemstones, a mix of vinegar and baking soda works miracles.

• Take your ring and place it in a bowl and then follow it with the pouring of white vinegar. 
• Add another half a teaspoon of baking soda into the bowl of water for it to make perfect sense in the process. 
• Rinse the products under warm water and then dry them with a clean, soft, and dry cloth.

Ammonia Solution 

But here it must be noted that ammonia is a powerful cleaner and should not be used frequently, yet the shine of the diamond rings can be regained with the help of ammonia. The latter is perfect for cleaning products that have thick layers of dirt on them. 

How to do it: 

• You take an equal measure of ammonia and dilute it with water in a ratio of 1:6 in another small bowl. 
• Submerse your ring into the solution just for a maximum of ten minutes. 
• After that, you will need to gently brush the ring using a toothbrush to remove dirt on the ring. 
• Lastly, this means rinsing the body section with warm water until it is ascertained that there is no residual ammonia being left. 
• You shall then clean the ring with a dry cloth. 

Jewelry Cleaner 

There are over-the-counter jewelry cleaners that are preferred as they are retail jewelry cleaners that can easily be accessed and are preferably used when cleaning rings. Most of these cleaners are good for most types of rings, but caution must be used while applying the cleaner to avoid damage to the ring. 

How to do it: 

• Buy a jewelry cleaner from a reputable jeweler or retailer store. 
• Wash your ring as instructed on the label as it applies majorly to all the products. It is usually a process, in which the ring is dipped into the solution for a few minutes before using a soft brush to clean the drinks area that Engagement Wedding Rings. 
• Remove the ring carefully and wash it with warm water only then pat it dry gently with the help of a clean cloth. 

Ultrasonic Cleaner 

An ultrasonic cleaner makes use of sound waves that cause bubbles on the surface of jewelry removing dirt and grime. While these machines can be professional tools, they are also some that can be used at home. Ultrasonic cleaning devices are useful, however, their application should be justified, preferable for rings with soft stones or delicate surrounding metalwork. 

How to do it: 

• Pour in water in the ultrasonic cleaner and then add dish soap in case any is needed. 
• Put your ring in the cleaner; the machine will then alert you to the time you need to take for cleaning. 
• After that has been done, it is important to take off the ring, wash it with warm water, and then wipe it clean with another piece of clean cloth.

Frequently Asked Questions 

Q1. How often should you clean your engagement ring and wedding rings?  

You are suggested to clean your rings at home if possible, on a per week basis because every day deposit of dirt and oils in the skin. To have the rings cleaned to the highest level, you should take your rings to be cleaned, professionally at least once every 6 to 12 month’s interval.

 Q2. Is it possible to clean the ring using household cleaners? 

Do not use household cleaning solutions, which contain bleach or chlorine as they will corrode the metal and stones. Rinse the ring gently with soap, baking soda, or any cleanser that is used for jewelry for 2-3 minutes, and then take it out from the water. 

Q3. Can rings with gemstones be cleaned at home? 

Yes, but be cautious. Hard stones such as the diamond, sapphire, and ruby rarely need to be cleaned and when they do, mild soap should suffice. Still, many beautiful gems, such as pearls or opals, must be handled more gently and, therefore, are better to be washed in a jeweler’s shop. 

Conclusion 

It is easy to maintain your engagement and wedding engagement and wedding rings look as good as on your first day with them. If you use the above outlined seven methods, it will be very easy to keep these parts bright and in good condition for several years. Using simple soapy water, baking soda paste, or a professional jewelry cleaner, the regularity of cleaning will ensure your rings sparkle just as bright as your love. To shop for your ideal ring, make sure to visit Hislon Jewelers right away.